google-site-verification=3MRQz002wT7GCJhAKX9ejCZAtkyYd6lmCqJxLk4nNRg Ongoing Orderly Liquidation Sale of Foundry Items Located at Sivyer Steel Castings, LLC
top of page

Ongoing Orderly Liquidation Sale of Foundry Items Located at Sivyer Steel Castings, LLC

Proxibid

AUCTION FORMAT

Orderly Liquidation

AUCTION STARTS

February 1 - TBD

​

LOCATION

225 33rd Street, Bettendorf, Iowa, 52722

FLAG.png
​
Directions

Click Here for a Video Slide Sale Presentation

DESCRIPTION

ONGOING ORDERLY LIQUIDATION SALE OF SIVYER STEEL CASTINGS FOUNDRY TYPE MACHINES & SUPPORT -CONTACT ROBERT BRUNDAGE AT 713-691-4401 FOR PRICING AND AVAILABILITY.

Featuring:

KLOSTER VERSA-MULL TYPE III DOUBLE ARTICULATED MIXER, 2,000 lb. per minute capacity, operator’s pulpit with joystick controls, power rotation primary and both secondary arms, 8’-6” discharge height, 14’ primary arm reach, 5’ secondary arm reach, 24’-3” max. reach, 50 HP, Alfaset resin system, Kloster 60 TPM sand heater/cooler/classifier, (2) large rectangular compaction tables, S/N 8097-VM3-2000, system installed 2009.

TINKER OMEGA ARTICULATED MIXER MDL. TOM1200, 1200 lb. per minute capacity, Next Gen 2 PLC controls, pwr. Primary & secondary arm rotation, Alfaset resin system, feed hopper, pneumatic transporter, (2) Kloster 45 TPH sand heater/cooler/classifiers, vibratory compaction tbl., H. D. roller conveyor molding line, 90 deg. turn unit, Kloster boiler & dust collector, system installed 2010.

KLOSTER VERSA-MULL TYPE II ARTICULATED MIXER, 1,000 lb. per minute capacity, power primary arm rotation, 7’-3” discharge height, 11’-8” primary arm reach, 15’-8” total reach, Alfaset resin system, feed hopper, Palmer additive system, Kloster 60 TPH sand heater/cooler/classifier, S/N MS-7428-VN2-1000, installed 2011

KLOSTER TILT-FRAME, 2-STATION MOLD SPRAY COATING SYSTEM, large capacity, with (2) coating pump/reservoir systems, catch pan, hyd. System.

OVER 1,000 STEEL FLASKS, from 24” x 27” up to 140” x 140” dimensions, and heights from 12” to 48”, round, square & rectangular shapes,

(2) QUIPTEC FLASKLESS MOLD MANIPULATORS, 10,000 lb. cap. unit MDL. OSR10K-06, S/N 453995, 6,000 lb. cap. unit MDL. 0SR6K-06, S/N 45-3601


SAND SYSTEMS

GENERAL KINEMATICS 18’ X 14’ SHAKEOUT DECK, new 2013, never installed, two-mass design, approx. 60 ton capacity,

GUDGEON THERMFIRE THERMAL RECLAIMER MDL. TF8000, new 2010, Allen Bradley PLC controls, 96 tons per day/480 tons per week thruput, 5 x 1.5 million BTU Kinemax burners, Castec Cel-300 feeder, S/N 1176

GUDGEON THERMFIRE SAND HEATER/COOLER/CLASSIFIER MDL. RES-A026, new 2010, S/N 1179

(2) GENERAL KINEMATICS VIBRA-MILL LUMP BREAKERS, programmable controller, S/N C10495-02, S/N N/A

SEVERAL MACAWBER & WHIRL-AIR FLOW SAND TRANSPORTERS W/ ALLEN BRADLEY PROGRAMMABLE CONTROLLER

(3) LARGE MODULAR CONSTRUCTION SAND BINS

ERIEZ ELECTROMAGNET MDL. MC2SE7330, 33.1-amp, 115 v., S/N 291022

(2) HI-VAC ELECTRIC POWERED SAND VACUUM SYSTEMS, one unit rebuilt 2022, with dump hoppers & hoses


MELT SHOP

(3) WHITING 9’ DIAMETER HYDRO-ARC MELTING FURNACES, pprox.. 8 t. capacity, hyd. Tilt drive, Pennsylvania 4,000 KVA type OW transformer, 13,200 V primary, recently retrofitted with Tenova model LPV4043 servo electrode control system, auto tap changer, auto vacuum breaker, Nidec variable frequency drives, several new copper lead sets, several spare furnace roofs, quantity of new electrodes, ductwork & fume/dust collector system

(2) GAS FIRED LADLE PRE-HEAT SYSTEMS;

(2) 10 T. CAP. LADLE HANDLERS;

(8) 10 T. CAP. BOTTOM POUR LADLES,

(2) BOTTOM-DROP CLAM SHELL SCRAP BUCKETS

LARGE QTY. SLAG POTS;

WALKER 54” CRANE MAGNET;

(3) CARDOX FIRE SUPPRESSION SYSTEMS


CLEANING ROOM

WHEELABRATOR 63” x 96” “TUMBLAST” SHOTBLASTING MACHINE, skip loader unit, 50 HP direct drive 24” dia. Wheel, Wheelabrator shaker style dust collector, S/N A56540

WHEELABRATOR TABLE BLAST MACHINE, 72” dia. Extra heavy cap. Tbl., manganese steel lining, recirculating shot system, 50 HP direct drive shot wheel, 500 lb. shot hopper w/ air feed system, Torit cartridge style dust collector, S/N NA

FREE STANDING BLAST ROOM, pprox.. 15’ wide x 20’ deep x 15’ ht., H.D. rail car, winch system, unitized panel construction, recirculating media system, dust collection system, Axxiom 10 cu. Ft. blast pot w/shot filtration system new 2019,

DAKE 300T CAP. HYDRAULIC STRAIGHTENEING PRESS,

CAR-BOTTOM HEAT TREAT FURNACES

BEVERMATIC CAR-BOTTOM FURNACE MDL.12X8X12DGCBF, new 2012, 12’ W x 12’ L x 8’ H interior dimensions, 72,000 lb. car weight cap., 1,850 deg. Max. temp. 350 deg. Min. temp., ceramic wool lining, pwr. car, Maxon MDL. 300SMA11-A11-B21A0 shut-off valves, Dungs combustion controls, (10) total burners, S/N 1011-175/8

BEVERMATIC CAR-BOTTOM FURNACE MDL.7X14X7DGCBF, 7’ W x 14’ L x 7’ H interior dimensions, 30,000 lb. car weight cap., 1,850 deg. Max. temp. 500 deg. Min. temp., ceramic wool lining, pwr. car, (this furnace is currently needing a relining) S/N 40153/8

OVERHEAD BRIDGE CRANES

ZENAR 20/10 TON TOP RUNNING DOUBLE GIRDER HOT METAL CRANE, new 2022, Class E rated, cab/radio controls, 20 T. cap. Main hoist, 10 T. cap. Aux. hoist, 63’-2-1/4” span, 30’ lift ht., digital crane scale w/ read-out, full-length service platform, S/N 8914 (new cost, $732,000.00)

ZENAR 20 TON TOP RUNNING DOUBLE GIRDER HOT METAL CRANE, new 2014, Class E rated, cab/radio controls, 20 T. cap. Main hoist, 63’-2-1/4” span, 30’ lift ht., full-length service platform S/N 8565

ZENAR 15 TON TOP RUNNING, DOUBLE GIRDER CRANE, 55’ pprox.. span, cab/radio controlled, S/N 4880


MAGNETIC PARTICLE INSPECTION

MAGNAFLUX MDL. CSV-20, 20,000 max. output amps fwdc, remote control stand, 5 gal. spray pot w/ agitator, spray head, (2) 24” x 48” copper plate material stands, S/N 623432-01

SEVERAL MAGNAFLUX MAGNETIC PARTICLE INSPECTION MACHINES

METALLURGICAL LAB

LECO MDL. ONH836 ELEMENTAL ANALYSER, pwr. purification system, vacuum, LECO TCH600 ELEMENTAL ANALYZER, APPLIED RESEARCH SPECTROMETER MDL. 3460, 9-elements, S/N 2144; WATGATE TECHNOLOGIES STRUCTURIX NDT-U X-RAY FILM DEVELOPER (new 2022); TINIUS OLSON TENSILE TESTER, hyd. Drive, computer read-out; TINIUS OLSON MDL. 84 CHARPY IMPACT TESTER; AMATEK STEEL TESTING MACHINES INC. BRINELL TESTING MACHINE; WILSON ROCKWELL HARDNESS TESTER MDL. 5JRBB, S/N 1510; HITACHI-SEIKI TSL15 CNC LATHE, Siecos 21L CNC control, 6” 3-jaw chuck; INDEX VERTICAL TURRET MILL; THERMOLINE OVEN; HEAVY DUTY ELECTRIC FURNACE, 1850 deg.; HEAVY DUTY FURNANCE MDL. HD10187, 2,000 deg. F, S/N 81212; BAILEIGH ENGINE LATHE MDL. PL1236DRO, ABELL HOWE ½ T. CAP. JIB CRANE, HYDMECH MITERING HORIZ. BANDSAW MDL. S20, S/N 20195057 KALAMAZOO 6” BELT SANDER; CARBORUNDUM ABRASIVE CUT-OFF SAW.

PATTERN SHOP

COMPLETE PATTERN SHOP INCLUDING: DELTA ROCKWELL VERTICAL BANDSAW; WALKER TURNER RADIAL DRILL; RIDGID COMPOUND MITER SAW; STENCIL MACHINES; WALKER TURNER VERICAL BANDSAW; SPINDEL SANDERS; DELTA TABLE SAW; JOINTER; 14” DELTA PLANER; BEVER VERTICAL TURRET MILL; SCROLL SAW; TILT FRAME VERTICAL BANDSAW, MARVEL NO. 8MK1, S/N 82174

ELECTRICAL SWITCHGEAR

HUGE ASSORTMENT OF TRANSFORMERS, CIRCUIT BREAKERS, MOTOR CONTROL CENTERS, AND RELATED ELECTRICAL GEAR SERVING UP TO 13,200 VOLT POWER SYSTEMS. All electrical systems with this facility are for sale. A single line electrical diagram is available upon request.

AIR COMPRESSOR SYSTEMS

(3) SULLAIR 200 HP WATER COOLED ROTARY SCREW AIR COMPRESSORS (two units recently rebuilt)

ATLAS COPCO MDL FD-1750 REFRIGERATED AIR DRYER, new 2019, 1,750 CFM capacity

COOLING CIRCUIT EQUIPMENT

(2) EVAPCO COOLING TOWER MDL. AT19-2H8, qty. of (4) 7 ½ HP vertical pumps, butterfly valves, S/N 21P118711

TRANE 300 T, CHILLER SYSTEM

FRONT END LOADER

JOHN DEERE ARTICULATED MDL. 444J HIGH LIFT, S/N DW444JH612883

HERR VOSS TENSION LEVELING LINE

Description: 37" X .063" X 27,000# HERR VOSS TENSION LEVELING LINE, YR 1992
(Located in storage facility in Mansfield Ohio)

GENERAL LINE SPECIFICATIONS

MANUFACTURER - HERR VOSS
YEAR - 1992
MATERIAL - STAINLESSS STEEL & INCONEL
YIELD - 100,000 PSI MAX
SHEAR STRENGTH - 80,000 PSI MAX
COIL WEIGHT - 27,000#
MAX COIL WIDTH - 37"
MIN COIL WIDTH - 24"
COILRANGE - 60"
COIL ID - 20"
GAUGE RANGE - .008" - .063"
LINE SPEED - 300-600 FPM
ELECTRICITY - 480 V, 3 PH, 60 CYCLE
LINE DIRECTION - LEFT TO RIGHT
STATUS - INSTALLED AND OPERATING

LINE COMPONENTS

L-SHAPED TRAVERSING ELEVATING COIL CAR

MANDREL UNCOILER W/ OVERARM SNUBBER ROLL
& PAPER WINDER
HYDRAULIC EXPANSION
WICHITA WATER COOLED BRAKE

HYDRAULIC PEELER TABLE
POLYEROTHANE ENTRY PINCH ROLLS
EDGE GUIDE SYSTEM

ENTRY HYDRAULIC CROP SHEAR
SCRAP CART
EXIT TABLE

VERTICAL PINCH ROLL CENTERING GUIDES

BEHLEN STITCHER
ENTRY ROLLER GUIDE

(4) ROLL S-TYPE DRAG TENSION BRIDLE ROLLS
EACH ROLL MOTOR CONNECTED TO NUTTAL GEAR BOX AND UNIVERSAL CONNECTION TO ROLL
#1 ROLL MOTOR - 15 HP
#2 ROLL MOTOR - 25 HP
#3 ROLL MOTOR - 50 HP
#4 ROLL MOTOR - 100 HP

5-ROLL PRECISION TENSION LEVELER - 3 OVER 2
LEVELER PIVOT DEVICE
1 1/2" DIAMETER LEVELING ROLLS

(4) ROLL S-TYPE DRIVE TENSION BRIDLE ROLLS
EACH ROLL MOTOR CONNECTED TO NUTTAL GEAR BOX AND UNIVERSAL CONNECTION TO ROLL
#1 ROLL MOTOR - 150 HP
#2 ROLL MOTOR - 100 HP
#3 ROLL MOTOR - 50 HP
#4 ROLL MOTOR - 25 HP

6' INSPECTION TABLE

THICKNESS GAUGE (SOURCE NOT INCLUDED)

EXIT HYDRAULIC CROP SHEAR
SCRAP CART

HYDRAULIC EXIT CARROYOVER TABLE
EDGE GUIDE SYSTEM
DEFLECTOR ROLL
PAPER UNWINDER

HYDRAULIC THREADING TABLE

MANDRELL UNCOILER WITH HOLDDOWN ROLL
HYDRAULIC EXPANSION

BELT WRAPPER

L-SHAPED TRAVERSING ELEVATING COIL CAR

ELECTRICS - GE DRIVE SYSTEMS

CONTROLS, ELECTRICS, HYDRAULIC UNIT

CLICK ON THE FOLLOWING LINK TO WATCH A VIDEO OF THE MACHINE

https://www.youtube.com/watch?v=-PgfYOcQif8




Inspection Information

Inspection Start Date/Time

Inspection End Date/Time

​

​

​

​

Removal Instructions

Terms & Conditions

All bidders must register before bidding. All bidders are required to provide the following information when registering:

(full) Name of Individual
(full)) Company name and address
Telephone and fax numbers
Email address

Banking information will be required when registering. If successful bidder is exempt from applicable sales taxes, then the proper sales tax exemption form(s) for the physical location of the item sold at the auction will be required prior to removing the tax from the buyer’s invoice. The exemption form(s) must match the buyer information on the invoice.

This auction may require a credit or debit card 100% refundable deposit. Your credit/debit card added through the Bidspotter.com or Proxibid.com fully secure and PCI compliant registration process will be assessed a 100% refundable $3000 (US Bidder) or a $10,000 (Foreign Bidder) deposit in order to be approved to bid online within this auction. If you are unsuccessful in the auction, your card will be refunded of your deposit within 24 hours post auction.

AUCTIONEER DOES NOT TAKE CREDIT CARDS FOR AUCTION INVOICE PAYMENTS. All invoice payments must be made by Wire Transfer, Cashier’s Check, or, Company Check with letter from Bank guaranteeing unqualified payment of your check to Plant & Machinery, Inc. (PMI). Here is an example of what your letter should say:

[Mr. “Individual’s Name” representing “Company Name” is a customer of this bank. This bank will guarantee unqualified payment to Plant & Machinery, Inc. on the account listed herein up to the amount of $______. This letter is good until (insert expiration date 30 days from sale date).]

All checks for deposits and balances due shall be payable to the order of PLANT & MACHINERY, INC. unless instructed otherwise. In some cases, payments may be taken direct to the auction site. Otherwise, all payments must be paid to the Houston headquarters offices of the Auctioneer at 1304 Langham Creek Drive, Suite 454, Houston, TX, 77084, or, by wire transfer directly to the bank specified in the wire transfer instructions provided for this auction, or, if by check, sent via overnight delivery service with associated letter of Bank guarantee before removal of any of the goods takes place.

NOTE: ALTHOUGH ALL INFORMATION HAS BEEN OBTAINED FROM SOURCES DEEMED RELIABLE, AUCTIONEER AND SELLER MAKE NO WARRANTY OR GUARANTEE EXPRESSED OR IMPLIED, AS TO THE ACCURACTY OF THE INFORMATION CONTAINED IN OUR ADVERTISING OR SALE CATALOG. THE AUCTIONEER AND SELLER SHALL NOT BE RESPONSIBLE FOR THE CORRECT DESCRIPTION, GENUINENESS, AUTHENTICITY OF, OR DEFECT IN ANY LOT, AND MAKES NO WARRANTY IN CONNECTION THEREWITH. BIDDER, OR THEIR REPRESENTATIVE, AGREE TO PHYSICALLY INSPECT THE LOT(S) AND MAKE THEIR OWN VERIFICATION OF THE CONTENTS.

NOTE: NO SALE SHALL BE SET ASIDE NOR ALLOWANCE MADE ON ACCOUNT OF ANY INCORRECTNESS, ERROR IN CATALOGING, OR ANY IMPERFECTION NOT NOTED. NO DEDUCTION WILL BE ALLOWED ON DAMAGED ARTICLES, ALL ARTICLES BEING EXPOSED FOR PUBLIC EXHIBITION, AND SOLD “AS IS” AND WITHOUT RECOURSE. ARTICLES ARE NOT WARRANTED AS MERCHANTABLE OR FIT FOR ANY PARTICULAR PURPOSE, AND NO CLAIM MAY BE MADE BY PURCHASER RELATING TO THE CONDITION OR USE OF ARTICLES PURCHASED, OR FOR PROXIMATE OR CONSEQUENTIAL DAMAGES ARISING THEREFROM.

The Auctioneer is acting as agent only and is not responsible for the acts of its principals. Purchaser acknowledges, as an inducement to Seller to commit Purchaser to bid, that Purchaser has independently inspected the goods bid upon by the Purchaser, and acknowledges to the Seller that Purchaser is acquiring all goods “AS IS, WITH ALL FAULTS” and “WITH REMOVAL AT PURCHASERS’ RISK AND EXPENSE” and agrees to protect, indemnify and hold harmless the Seller from any and all claims, demands, causes of actions, liabilities and judgments relating to the conditions or use of the goods.

All purchases must be removed within two weeks after the bids have closed, or, within the timeframe posted on the sale web page or contained in the confirmation email sent to successful bidder. No lot can, on any account, be removed prior to PMI having been paid in full. Removal shall be at the expense, risk and liability of the Purchaser. Purchases will be delivered only on presentation of paid bill. Auctioneer shall not be responsible for goods not removed within the aforesaid time.

Riggers, movers, electricians or buyer performing work at the Auction Site(s) must provide Auctioneer with evidence of insurance. The insurance coverage must be at a level acceptable to Auctioneer and to the Seller. Auctioneer and Seller must be added as additional insured on the Certificate of Insurance.

Articles purchased may not incorporate approved activating mechanisms, operating safety devices or safety guards, as required by OSHA or otherwise. It is Purchaser’s responsibility that articles purchased be so equipped and safeguarded to meet OSHA and any other requirements before placing such articles into operation.

Purchaser agrees to indemnify and hold Auctioneer harmless from and against all claims and liabilities relating to the condition or use of the articles purchased or failure of user to follow instructions, warnings or recommendations of the manufacturer, or to comply with federal, state and local laws applicable to such articles, including OSHA requirements, or for proximate or consequential damages, costs or legal expenses arising therefrom.

No claims will be allowed after removal of goods from premises.

Auctioneer shall not, in any event, be liable for non-delivery or any other matter or thing, to any Purchaser of any lot other than for the return to the Purchaser of the deposit or sum paid on said lot, should the Purchaser be entitled thereto. Auctioneer is not responsible for online bidding system performance.

In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of re-sale, will be charged to the defaulting Purchaser.

Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the Auctioneer from liability therefor. Neither the Auctioneer nor his principal shall be liable by reason of defect in or condition of the premises on which the sale is held.

The Auctioneer reserves the right to withdraw from sale any of the property listed or to sell at this sale property not listed, and also reserves the right to group one or more lots into one or more selling lots or to subdivide into two or more selling lots. Whenever the best interest of a Seller will be served, the Auctioneer reserves the right to sell all the property listed, in bulk. Some items may be auctioned with reserve. Auctioneer reserves the right to accept bids from the Seller. This auction may contain consignments. The Auctioneer reserves the right to alter the order of sale. All bids are visible to the auctioneer. Auctioneer is not responsible for internet lags, delay, blackouts, or disconnects. Auctioneer shall determine the bidding increments used in this auction.

Where items are sold by estimated weight, count or measure, the Purchaser will be billed for and required to pay for the estimated weight, count or measure. If, upon delivery, any shortage exists, the Purchaser will receive a refund at the rate of purchase. If there be an excess, the Purchaser will be required to pay for such excess, at the rate of purchase.

The record of sale kept by the Auctioneer will be taken as final in the event of any dispute.

Seller, if not the same as the Auctioneer, shall have the rights, protections and benefits afforded to the Auctioneer as set forth herein.

Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact Auctioneer in advance of your travel to verify the current details about this auction.

ANY ADDITIONAL PROVISIONS OR AMENDMENTS TO THE ABOVE LISTED TERMS WILL BE POSTED TO THE ON-LINE SALE WEB PAGE BY THE AUCTIONEER PRIOR TO THE START OF BIDDING.

Important Documents

Image Gallery [CLICK ON IMAGE FOR FULL VIEW]

Additional PDFs

Removal Instructions
Inspection Information
Important Documents
Terms and Conditions

Share this page!

bottom of page